华擎主板 网络唤醒 wake on lan 教程

前面的ql3x、 b150m pro4s

bios电池没电了,然后网络唤醒又失效了.

结果设置好 还是不行,结果还要win下面的驱动设置

https://www.asrock.com/support/faq.asp?k=wake+on+lan#FAQa481

Question: How can I enable wake on LAN function under S5 status in Windows 10 with Intel I211 LAN port?(8/1/2019)
Answer:
Step 1: Please visit ASRock website to download the Intel LAN driver.
https://www.asrock.com/mb/index.asp
Step 2: Refer to the FAQ from the following link to modify the shutdown behavior under Windows 10.
https://www.asrock.com/support/faq.asp?id=408
Step 3: Go to device manager and right click the "Intel® I211/I219 Gigabit Network Connection” LAN device to choose the "Properties”.
Step 4: Intel LAN driver may have two different "Properties”.

(A) The driver supports "Power saver and Wake on LAN” Option.
Please go to Power management to check all of Wake on LAN function.

(B) The driver supports "Enabled PME” Option.
Go to "Advanced” and enable the "Enabled PME” option.

本站文章资源均来源自网络,除非特别声明,否则均不代表站方观点,并仅供查阅,不作为任何参考依据!
如有侵权请及时跟我们联系,本站将及时删除!
如遇版权问题,请查看 本站版权声明
THE END
分享
二维码
海报
华擎主板 网络唤醒 wake on lan 教程
前面的ql3x、 b150m pro4s bios电池没电了,然后网络唤醒又失效了. 结果设置好 还是不行,结果还要win下面的驱动设置 https://www.asrock.com/support/faq.asp……
<<上一篇
下一篇>>
文章目录
关闭
目 录