ElasticSearch实战:Linux日志对接Kibana

原创声明:本文首发腾讯云·云+社区,未经允许,不得转载

ElasticSearch是一个基于Lucene的搜索服务器。它提供了一个分布式多用户能力的全文搜索引擎,基于RESTFul web接口。ElasticSearch是用Java开发的,并作为Apache许可条款下的开放源码发布,是当前流行的企业级搜索引擎。ElasticSearch常用于全文检索,结构化检索,数据分析等。


下面,我们以ElasticSearch接管Linux日志(/var/log/xxx.log)为例,详细介绍如何进行配置与部署。

总体架构图

一,准备工作

1,CVM及ElasticSearch

在腾讯云帐号下,申请一台CVM(Linux操作系统)、一个ElasticSearch集群(后面简称ES),使用最简配置即可;申请的CVM和ES,必须在同一个VPC的同一个子网下。

CVM详情信息
ElasticSearch详情信息

2,Filebeat工具

为了将Linux日志提取到ES中,我们需要使用Filebeat工具。Filebeat是一个日志文件托运工具,在你的服务器上安装客户端后,Filebeat会监控日志目录或者指定的日志文件,追踪读取这些文件(追踪文件的变化,不停的读),并且转发这些信息到ElasticSearch或者logstarsh中存放。当你开启Filebeat程序的时候,它会启动一个或多个探测器(prospectors)去检测你指定的日志目录或文件,对于探测器找出的每一个日志文件,Filebeat启动收割进程(harvester),每一个收割进程读取一个日志文件的新内容,并发送这些新的日志数据到处理程序(spooler),处理程序会集合这些事件,最后Filebeat会发送集合的数据到你指定的地点。

官网简介:https://www.elastic.co/products/beats/filebeat

二,操作步骤

1,Filebeat下载与安装

首先,登录待接管日志的CVM,在CVM上下载Filebeat工具:

[root@VM_3_7_centos ~]# cd /opt/
[root@VM_3_7_centos opt]# ll
total 4
drwxr-xr-x. 2 root root 4096 Sep  7  2017 rh
[root@VM_3_7_centos opt]# wget https://artifacts.elastic.co/downloads/beats/filebeat/filebeat-6.2.2-x86_64.rpm
--2018-12-10 20:24:26--  https://artifacts.elastic.co/downloads/beats/filebeat/filebeat-6.2.2-x86_64.rpm
Resolving artifacts.elastic.co (artifacts.elastic.co)... 107.21.202.15, 107.21.127.184, 54.225.214.74, ...
Connecting to artifacts.elastic.co (artifacts.elastic.co)|107.21.202.15|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 12697788 (12M) [binary/octet-stream]
Saving to: ‘filebeat-6.2.2-x86_64.rpm’

100%[=================================================================================================>] 12,697,788   160KB/s   in 1m 41s 

2018-12-10 20:26:08 (123 KB/s) - ‘filebeat-6.2.2-x86_64.rpm’ saved [12697788/12697788]

然后,进行安装filebeat:

[root@VM_3_7_centos opt]# rpm -vi filebeat-6.2.2-x86_64.rpm
warning: filebeat-6.2.2-x86_64.rpm: Header V4 RSA/SHA512 Signature, key ID d88e42b4: NOKEY
Preparing packages...
filebeat-6.2.2-1.x86_64
[root@VM_3_7_centos opt]#

至此,Filebeat安装完成。

2,Filebeat配置

进入Filebeat配置文件目录:/etc/filebeat/

[root@VM_3_7_centos opt]# cd /etc/filebeat/
[root@VM_3_7_centos filebeat]# ll
total 108
-rw-r--r-- 1 root root 44384 Feb 17  2018 fields.yml
-rw-r----- 1 root root 52193 Feb 17  2018 filebeat.reference.yml
-rw------- 1 root root  7264 Feb 17  2018 filebeat.yml
drwxr-xr-x 2 root root  4096 Dec 10 20:35 modules.d
[root@VM_3_7_centos filebeat]#

其中,filebeat.yml就是我们需要修改的配置文件。建议修改配置前,先备份此文件。

然后,确认需要对接ElasticSearch的Linux的日志目录,我们以下图(/var/log/secure)为例。

/var/log/secure日志文件

使用vim打开/etc/filebeat/filebeat.yml文件,修改其中的:

1)Filebeat prospectors类目中,enable默认为false,我们要改为true

2)paths,默认为/var/log/*.log,我们要改为待接管的日志路径:/var/log/secure

3)Outputs类目中,有ElasticSearchoutput配置,其中hosts默认为"localhost:9200",需要我们手工修改为上面申请的ES子网地址和端口,即"10.0.3.8:9200"

修改好上述内容后,保存退出。

修改好的配置文件全文如下:

[root@VM_3_7_centos /]# vim /etc/filebeat/filebeat.yml
[root@VM_3_7_centos /]# cat /etc/filebeat/filebeat.yml
###################### Filebeat Configuration Example #########################

# This file is an example configuration file highlighting only the most common
# options. The filebeat.reference.yml file from the same directory contains all the
# supported options with more comments. You can use it as a reference.
#
# You can find the full configuration reference here:
# https://www.elastic.co/guide/en/beats/filebeat/index.html

# For more available modules and options, please see the filebeat.reference.yml sample
# configuration file.

#=========================== Filebeat prospectors =============================

filebeat.prospectors:

# Each - is a prospector. Most options can be set at the prospector level, so
# you can use different prospectors for various configurations.
# Below are the prospector specific configurations.

- type: log

  # Change to true to enable this prospector configuration.
  enabled: true

  # Paths that should be crawled and fetched. Glob based paths.
  paths:
    - /var/log/secure
    #- c:\\programdata\\elasticsearch\\logs\\*

  # Exclude lines. A list of regular expressions to match. It drops the lines that are
  # matching any regular expression from the list.
  #exclude_lines: ['^DBG']

  # Include lines. A list of regular expressions to match. It exports the lines that are
  # matching any regular expression from the list.
  #include_lines: ['^ERR', '^WARN']

  # Exclude files. A list of regular expressions to match. Filebeat drops the files that
  # are matching any regular expression from the list. By default, no files are dropped.
  #exclude_files: ['.gz$']

  # Optional additional fields. These fields can be freely picked
  # to add additional information to the crawled log files for filtering
  #fields:
  #  level: debug
  #  review: 1

  ### Multiline options

  # Mutiline can be used for log messages spanning multiple lines. This is common
  # for Java Stack Traces or C-Line Continuation

  # The regexp Pattern that has to be matched. The example pattern matches all lines starting with [
  #multiline.pattern: ^\\[

  # Defines if the pattern set under pattern should be negated or not. Default is false.
  #multiline.negate: false

  # Match can be set to "after" or "before". It is used to define if lines should be append to a pattern
  # that was (not) matched before or after or as long as a pattern is not matched based on negate.
  # Note: After is the equivalent to previous and before is the equivalent to to next in Logstash
  #multiline.match: after


#============================= Filebeat modules ===============================

filebeat.config.modules:
  # Glob pattern for configuration loading
  path: ${path.config}/modules.d/*.yml

  # Set to true to enable config reloading
  reload.enabled: false

  # Period on which files under path should be checked for changes
  #reload.period: 10s

#==================== Elasticsearch template setting ==========================

setup.template.settings:
  index.number_of_shards: 3
  #index.codec: best_compression
  #_source.enabled: false

#================================ General =====================================

# The name of the shipper that publishes the network data. It can be used to group
# all the transactions sent by a single shipper in the web interface.
#name:

# The tags of the shipper are included in their own field with each
# transaction published.
#tags: ["service-X", "web-tier"]

# Optional fields that you can specify to add additional information to the
# output.
#fields:
#  env: staging


#============================== Dashboards =====================================
# These settings control loading the sample dashboards to the Kibana index. Loading
# the dashboards is disabled by default and can be enabled either by setting the
# options here, or by using the `-setup` CLI flag or the `setup` command.
#setup.dashboards.enabled: false

# The URL from where to download the dashboards archive. By default this URL
# has a value which is computed based on the Beat name and version. For released
# versions, this URL points to the dashboard archive on the artifacts.elastic.co
# website.
#setup.dashboards.url:

#============================== Kibana =====================================

# Starting with Beats version 6.0.0, the dashboards are loaded via the Kibana API.
# This requires a Kibana endpoint configuration.
setup.kibana:

  # Kibana Host
  # Scheme and port can be left out and will be set to the default (http and 5601)
  # In case you specify and additional path, the scheme is required: http://localhost:5601/path
  # IPv6 addresses should always be defined as: https://[2001:db8::1]:5601
  #host: "localhost:5601"

#============================= Elastic Cloud ==================================

# These settings simplify using filebeat with the Elastic Cloud (https://cloud.elastic.co/).

# The cloud.id setting overwrites the `output.elasticsearch.hosts` and
# `setup.kibana.host` options.
# You can find the `cloud.id` in the Elastic Cloud web UI.
#cloud.id:

# The cloud.auth setting overwrites the `output.elasticsearch.username` and
# `output.elasticsearch.password` settings. The format is `<user>:<pass>`.
#cloud.auth:

#================================ Outputs =====================================

# Configure what output to use when sending the data collected by the beat.

#-------------------------- Elasticsearch output ------------------------------
output.elasticsearch:
  # Array of hosts to connect to.
  hosts: ["10.0.3.8:9200"]

  # Optional protocol and basic auth credentials.
  #protocol: "https"
  #username: "elastic"
  #password: "changeme"

#----------------------------- Logstash output --------------------------------
#output.logstash:
  # The Logstash hosts
  #hosts: ["localhost:5044"]

  # Optional SSL. By default is off.
  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client Certificate Key
  #ssl.key: "/etc/pki/client/cert.key"

#================================ Logging =====================================

# Sets log level. The default log level is info.
# Available log levels are: error, warning, info, debug
#logging.level: debug

# At debug level, you can selectively enable logging only for some components.
# To enable all selectors use ["*"]. Examples of other selectors are "beat",
# "publish", "service".
#logging.selectors: ["*"]

#============================== Xpack Monitoring ===============================
# filebeat can export internal metrics to a central Elasticsearch monitoring
# cluster.  This requires xpack monitoring to be enabled in Elasticsearch.  The
# reporting is disabled by default.

# Set to true to enable the monitoring reporter.
#xpack.monitoring.enabled: false

# Uncomment to send the metrics to Elasticsearch. Most settings from the
# Elasticsearch output are accepted here as well. Any setting that is not set is
# automatically inherited from the Elasticsearch output configuration, so if you
# have the Elasticsearch output configured, you can simply uncomment the
# following line.
#xpack.monitoring.elasticsearch:
[root@VM_3_7_centos /]# 

执行下列命令启动filebeat

[root@VM_3_7_centos /]# sudo /etc/init.d/filebeat start
Starting filebeat (via systemctl):                         [  OK  ]
[root@VM_3_7_centos /]# 

3,Kibana配置

进入ElasticSearch对应的Kibana管理页,如下图。

首次访问Kibana默认会显示管理页

首次登陆,会默认进入Management页面,我们需要将Index pattern内容修改为:filebeat-*,然后页面会自动填充Time Filter field name,不需手动设置,直接点击Create即可。点击Create后,页面需要一定时间来加载配置和数据,请稍等。如下图:

将Index pattern内容修改为:filebeat-*,然后点击Create

至此,CVM上,/var/log/secure日志文件,已对接到ElasticSearch中,历史日志可以通过Kibana进行查询,最新产生的日志也会实时同步到Kibana中。

三,实战效果

日志接管已完成配置,如何使用呢?

如下图:

在Index Patterns中可以看到我们配置过的filebeat-*

点击Discover,即可看到secure中的所有日志,页面上方的搜索框中输入关键字,即可完成日志的检索。如下图(点击图片,可查看高清大图):

使用Kibana进行日志检索

实际上,检索只是Kibana提供的诸多功能之一,还有其他功能如可视化、分词检索等,还有待后续研究。

本站文章资源均来源自网络,除非特别声明,否则均不代表站方观点,并仅供查阅,不作为任何参考依据!
如有侵权请及时跟我们联系,本站将及时删除!
如遇版权问题,请查看 本站版权声明
THE END
分享
二维码
海报
ElasticSearch实战:Linux日志对接Kibana
ElasticSearch是一个基于Lucene的搜索服务器。它提供了一个分布式多用户能力的全文搜索引擎。
<<上一篇
下一篇>>