Hetzner AX41 安装 Proxmox VE 7

随风 • 2022-12-11 • Linux教程, 教程 • 403 阅读

1、通过面板启动救援模式，记住登录密码，用于救援模式和安装后的PVE7。

2、重新启动服务器

3、通过 ssh root@10.11.12.13 连接服务器的救援系统，密码为启动救援模式生成的密码。

Linux rescue 5.19.11 #1 SMP Mon Sep 26 04:42:52 UTC 2022 x86_64

-------------------------------------------------------------------------------------------------------------------------

Welcome to the Hetzner Rescue System.

This Rescue System is based on Debian GNU/Linux 11 (bullseye) with a custom kernel.
You can install software like you would in a normal system.

To install a new operating system from one of our prebuilt images, run 'installimage' and follow the instructions.

Important note: Any data that was not written to the disks will be lost during a reboot.

For additional information, check the following resources:
Rescue System: https://docs.hetzner.com/robot/dedicated-server/troubleshooting/hetzner-rescue-system
Installimage: https://docs.hetzner.com/robot/dedicated-server/operating-systems/installimage
Install custom software: https://docs.hetzner.com/robot/dedicated-server/operating-systems/installing-custom-images
other articles: https://docs.hetzner.com/robot

-------------------------------------------------------------------------------------------------------------------------

Rescue System up since 2022-12-10 22:13 +01:00

Hardware data:

CPU1: AMD Ryzen 5 3600 6-Core Processor (Cores 12)
Memory: 64250 MB
Disk /dev/nvme0n1: 512 GB (=> 476 GiB)
Disk /dev/sda: 6001 GB (=> 5589 GiB)
Disk /dev/sdb: 6001 GB (=> 5589 GiB)
Total capacity 11 TiB with 3 Disks

Network data:
eth0 LINK: yes
MAC: de:ad:be:ef:de:ad
IP: 10.11.12.13
IPv6: 2a01:4f9:1a:dead::2/64
Intel(R) Gigabit Ethernet Network Driver

root@rescue ~ #

4、开始安装 PVE7

root@rescue ~ # installimage

编辑主机名和磁盘分区等信息，F10 保存退出编辑器。

参考：https://docs.hetzner.com/robot/dedicated-server/operating-systems/installimage/

Hetzner Online GmbH - installimage

Your server will be installed now, this will take some minutes
You can abort at any time with CTRL+C ...

: Reading configuration done
: Loading image file variables done
: Loading debian specific functions done
1/15 : Deleting partitions done
2/15 : Test partition size done
3/15 : Creating partitions and /etc/fstab done
4/15 : Formatting partitions
: formatting /dev/nvme0n1p1 with ext3 done
: formatting /dev/nvme0n1p2 with swap done
: formatting /dev/nvme0n1p3 with ext4 done
5/15 : Mounting partitions done
6/15 : Sync time via ntp done
: Importing public key for image validation done
7/15 : Validating image before starting extraction done
8/15 : Extracting image (local) done
9/15 : Setting up network config done
10/15 : Executing additional commands
: Setting hostname done
: Generating new SSH keys done
: Generating ramdisk done
: Generating ntp config done
11/15 : Setting up miscellaneous files done
12/15 : Configuring authentication
: Setting root password done
: Enabling SSH root login with password done
13/15 : Installing bootloader grub done
14/15 : Running some debian specific functions done
15/15 : Clearing log files done
: Executing post installation script

----- Update and upgrade system, please wait ... -----

WARNING: apt does not have a stable CLI interface. Use with caution in scripts.

... ... ... ... ... ... ... ... ... ... ... ... ... ...

----- Done installing Proxmox VE -----


INSTALLATION COMPLETE
You can now reboot and log in to your new system with the
same credentials that you used to log into the rescue system.

5、重启系统